Arene Ruthenium(II) Complexes Bearing the κ-P or κ-P,κ-S Ph2P(CH2)3SPh Ligand

Neutral [Ru(η⁶-arene)Cl₂{Ph₂P(CH₂)₃SPh-κP}] (arene = benzene, indane, 1,2,3,4-tetrahydronaphthalene: 2a, 2c and 2d) and cationic [Ru(η⁶-arene)Cl(Ph₂P(CH₂)₃SPh-κP,κS)]X complexes (arene = mesitylene, 1,4-dihydronaphthalene; X = Cl: 3b, 3e; arene = benzene, mesitylene, indane, 1,2,3,4-tetrahydronaphthalene, and 1,4-dihydronaphthalene; X = PF₆: 4a–4e) complexes were prepared and characterized by elemental analysis, IR, ¹H, ¹³C and ³¹P NMR spectroscopy and also by single-crystal X-ray diffraction analyses. The stability of the complexes has been investigated in DMSO. Complexes have been assessed for their cytotoxic activity against 518A2, 8505C, A253, MCF-7 and SW480 cell lines. Generally, complexes exhibited activity in the lower micromolar range; moreover, they are found to be more active than cisplatin. For the most active ruthenium(II) complex, 4b, bearing mesitylene as ligand, the mechanism of action against 8505C cisplatin resistant cell line was determined. Complex 4b induced apoptosis accompanied by caspase activation.     

Application of Natural Clinoptilolite for Ammonium Removal from Sludge Water

Sludge water (SW) arising from the dewatering of anaerobic digested sludge causes high back loads of ammonium, leading to high stress (inhibition of the activity of microorganisms by an oversupply of nitrogen compounds (substrate inhibition)) for wastewater treatment plants (WWTP). On the other hand, ammonium is a valuable resource to substitute ammonia from the energy intensive Haber-Bosch process for fertilizer production. Within this work, it was investigated to what extent and under which conditions Carpathian clinoptilolite powder (CCP 20) can be used to remove ammonium from SW and to recover it. Two different SW, originating from municipal WWTPs were investigated (SW1: c₀ = 967 mg/L NH₄-N, municipal wastewater; SW2: c₀ = 718–927 mg/L NH₄-N, large industrial wastewater share). The highest loading was achieved at 307 K with 16.1 mg/g (SW1) and 15.3 mg/g (SW2) at 295 K. Kinetic studies with different specific dosages (0.05 g_CLI/mg_NH4-N), temperatures (283–307 K) and pre-loaded CCP 20 (0–11.4 mg/g) were conducted. At a higher temperature a higher load was achieved. Already after 30 min contact time, regardless of the sludge water, a high load up to 7.15 mg/g at 307 K was reached, achieving equilibrium after 120 min. Pre-loaded sorbent could be further loaded with ammonium when it was recontacted with the SW.     

Comment on "Wide-field coherent anti-Stokes Raman scattering microscopy with non-phase-matching illumination"

We comment on a Letter by Toytman et al. [Opt. Lett.32, 1941 (2007)] in which a novel setup for wide-field imaging in coherent anti-Stokes Raman scattering (CARS) microscopy is demonstrated. There the authors state that our phase-matching implementation of a wide-field CARS system [Appl. Phys. Lett.84, 816 (2004); New J. Phys.8, 36 (2006)] suffers from a strong background from the bulk medium. However, our results show quite the contrary, i.e., that our setup provides a very good signal contrast, due to an almost vanishing background level from the bulk solvent.     

Incorporation of β-Alanine in Cu(II) ATCUN Peptide Complexes Increases ROS Levels,DNA Cleavage and Antiproliferative Activity**

Redox-active Cu(II) complexes are able to form reactive oxygen species (ROS) in the presence of oxygen and reducing agents. Recently, Faller et al. reported that ROS generation by Cu(II) ATCUN complexes is not as high as assumed for decades. High complex stability results in silencing of the Cu(II)/Cu(I) redox cycle and therefore leads to low ROS generation. In this work, we demonstrate that an exchange of the α-amino acid Gly with the β-amino acid β-Ala at position 2 (Gly2→β-Ala2) of the ATCUN motif reinstates ROS production (^•OH and H₂O₂). Potentiometry, cyclic voltammetry, EPR spectroscopy and DFT simulations were utilized to explain the increased ROS generation of these β-Ala2-containing ATCUN complexes. We also observed enhanced oxidative cleavage activity towards plasmid DNA for β-Ala2 compared to the Gly2 complexes. Modifications with positively charged Lys residues increased the DNA affinity through electrostatic interactions as determined by UV/VIS, fluorescence, and CD spectroscopy, and consequently led to a further increase in nuclease activity. A similar trend was observed regarding the cytotoxic activity of the complexes against several human cancer cell lines where β-Ala2 peptide complexes had lower IC₅₀ values compared to Gly2. The higher cytotoxicity could be attributed to an increased cellular uptake as determined by ICP-MS measurements.     

Intermolecular Radical Carbofluorination of Non‐activated Alkenes

The Meerwein arylation has recently become an even more powerful tool for the functionalization of alkenes. Besides the attachment of an aryl group, radical reactions of this type allow the introduction of several different heteroatoms and a broad variety of alkenes are meanwhile tolerated as substrates. Closing a long‐standing gap of the methodology, this communication describes the first intermolecular Meerwein‐type carbofluorination. In metal‐free reactions, arylalkyl fluorides were obtained from arylhydrazines and alkenes with Selectfluor acting as oxidant and as radical fluorine source.     

Synthesis of β-Ketoiminato Copper(II) Complexes and Their Use in Copper Deposition

The template synthesis of ethylenediamine ( 1 ) with 2-acetylcyclopentanone ( 2 ) and [Cu(OAc)₂ · H₂O] ( 5 ) produced [Cu(1-(2-cC₅H₆(O))C(Me)NCH₂)₂)] ( 6 ) in 82 % yield. Reaction of 5 with bis(benzoylacetone)diethylenetriamine ( 7 , = L H)^[1] gave [Cu(μ-OAc)( L )(H₂O)]₂ ( 8 ). The solid-state structures of 6 and 8 were determined confirming that 8 possesses intra- and intermolecular hydrogen bonds resulting in a dimer formation. The thermal behavior of 6 – 8 was studied by TG and TG-MS. Under oxygen CuO was formed, whereas under Ar Cu/Cu₂O ( 6 ) or Cu ( 8 ) was obtained. Complex 6 was used as CVD precursor for Cu and Cu-oxide deposition (substrate temp., 400–500 °C, N₂, 60 mL · min^–1; O₂, 60 mL · min^–1; pressure, 0.87–1.5 mbar). The as-obtained deposits show separated particles of different appearance at the substrate surface as evidenced by SEM. Non-volatile 8 was applied as spin-coating precursor for Cu and CuO formation [conc. 0.25 mol · L^–1; volume 0.2 mL; 3000 rpm; depos. time 2 min; heating rate 50 K · min^–1; holding time 60 min (Ar), 120 min (air) at 800 °C]. The samples on silicon consist of granulated particles (Ar) or are non-dense with a grainy topography (air). EDX and XPS measurements confirmed the formation of Cu (Ar) or CuO (O₂) with up to 13 mol-% C impurity.     

RuII and RuIII Chloronitrile Complexes: Synthesis,Reaction Chemistry,Solid State Structure,and (Spectro)Electrochemical Behavior

The synthesis of [Ti₆O₄(OiPr)₈(O₂CPh)₈] ( 3 ) and [RuCl(N≡CR)₅][RuCl₄(N≡CR)₂] ( 4a , R = Me; 4b , R = Ph), [Ru(N≡CPh)₆][RuCl₄(N≡CPh)₂] ( 5 ) and [H₃O][RuCl₄(N≡CMe)₂] ( 7a ) is discussed. Crystallization of 5 from CH₂Cl₂ gave trans-[RuCl₂(N≡CPh)₄] ( 6 ). The solid-state structures of 3 , 4a , b , 5 , 6 and 7a are reported. Complex 4b forms a 3D network, while 6 displays a 2D structure, due to π-interactions between the benzonitrile ligands. The (spectro)electrochemical behavior of 4a , b and 6 was studied at 25 and –72 °C and the results thereof are compared with [NEt₄][RuCl₄(N≡CMe)₂] ( 7b ) and [RuCl(N≡CPh)₅][PF₆] ( 8 ). The electrochemical response of the cation and the anion in 4a , b are independent from each other. [RuCl(N≡CR)₅]⁺ possesses one reversible Ru^II/Ru^III process. However, [RuCl₄(N≡CMe)₂]^– was shown to be prone to ligand exchange and disproportionation upon formation of either a Ru^IV and Ru^II species at 25 °C, while at –72 °C the rapid conversion of the electrochemically formed species is hindered. In situ IR and UV/Vis/NIR studies confirmed the respective disproportionation reaction products of the aforementioned oxidation and reduction, respectively.     

An Arylazopyrazole‐Based N‐Heterocyclic Carbene as a Photoswitch on Gold Surfaces: Light‐Switchable Wettability,Work Function,and Conductance

A novel photoresponsive and fully conjugated N‐heterocyclic carbene (NHC) has been synthesized that combines the excellent photophysical properties of arylazopyrazoles (AAPs) with an NHC that acts as a robust surface anchor (AAP‐BIMe). The formation of self‐assembled monolayers (SAMs) on gold was proven by ToF‐SIMS and XPS, and the organic film displayed a very high stability at elevated temperatures. This stability was also reflected in a high desorption energy, which was determined by temperature‐programmed SIMS measurements. E‐/Z‐AAP‐BIMe@Au photoisomerization resulted in reversible alterations of the surface energy (i.e. wettability), the surface potential (i.e. work function), and the conductance (i.e. resistance). The effects could be explained by the difference in the dipole moment of the isomers. Furthermore, sequential application of a dummy ligand by microcontact printing and subsequent backfilling with AAP‐BIMe allowed its patterning on gold. To the best of our knowledge, this is the first example of a photoswitchable NHC on a gold surface. These properties of AAP‐BIMe@Au illustrate its suitability as a molecular switch for electronic devices.     

A new torsion-rotation fitting program for molecules with a sixfold barrier: Application to the microwave spectrum of toluene

A new program is described for fitting rotation-torsion energy levels in molecules like toluene, in which the frame (C₆H₅) has C_2v symmetry and the methyl top has C_3v symmetry, i.e., for molecules where the internal rotation barrier is expanded in cos6nα, where α is the internal rotation angle and n = 1,2,…. The program is based on the theoretical framework developed by Sørensen and Pedersen in their application of the Longuet-Higgins permutation-inversion group G₁₂ to the microwave spectrum of CH₃NO₂. It is specifically designed for sixfold barrier molecules, and allows the user to select almost any symmetry-allowed torsion-rotation term for inclusion in the fitting Hamiltonian. This program leads to a very successful fit of transitions in the microwave spectrum of toluene characterized by J ? 30, K_a ? 12, and by the free-rotor quantum number ∣m∣ ? 3. In these fits we included both published and rather extensive unpublished new measurements, for which fits using other torsion-rotation programs have not been very successful. The fit presented here uses 28 parameters to give an overall standard deviation of 7.4 kHz for 372 line frequencies, and results in a much improved value for the sixfold barrier for toluene, V₆ = 13.832068(3) cal mol⁻¹.